Produção científica de bolsistas pesquisa em Ciência da Informação do Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) - um estudo com artigos de periódicos

Information Science (IS) research has strongly grown in Brazil, in the last decade, and, as a consequence, it was possible to observe a growth of the support given by the Brazilian National Scientific and Technological Development Council - CNPq. In this sense, this paper aims to analyze the scientific production (journal papers) of the 15 IS researchers who have the highest level research fellowships during the period between 2001 and 2010. Data were analyzed in terms of bibliographic dispersion, internationalization, and scientific collaboration as well as in terms of the most prominent journals. The results (219 papers) evidence an average of around 1.5 papers per author per year and a group of 63 different journals (60% evaluated under levels Qualis A1 and B1). The journal DataGramaZero is strongly present since it responds for 22% of the whole production. It was possible to observe a still shy presence of foreign journals and none of them belong to the Anglo-Saxon environment. The kind of authorship is well-balanced between individual and collective ones, including inter-institutional collaboration. It is possible to conclude that this group is mature and very productive, and it represents an academical IS leadership in Brazil but still lacks more international visibility.

Ensenyar en un món científic i tecnològic. 'Enseñar en un mundo científico y tecnológico'.

Resumen tomado de la publicación en catalán. Este artículo forma parte del monográfico 'Tecnociència a l'ensenyament?'

La dinámica de las publicaciones y las patentes como una aproximación al desarrollo científico y tecnológico de los países

El objetivo de este documento es proponer una caracterización, distinta a las convencionales, de países desarrollados y en desarrollo, en términos de ciencia y tecnología. En primer lugar, identificamos los procesos generadores de las publicaciones y las patentes de los países. Luego relacionamos las etapas de desarrollo de los países (Banze (2000)) con la dinámica encontrada en las series. Los resultados indican que no es necesario tener una infraestructura científica fuerte para desarrollar el ámbito tecnológico. Para algunos países, es la innovación tecnológica la principal responsable de la trayectoria del sistema nacional de innovación.

Programa de diversificación curricular : ámbito científico y tecnológico : ESO, 4õ curso.

Material didáctico que reúne los conceptos más importantes de las materias científico-tecnológicas de la educación secundaria, junto con unos contenidos de carácter práctico. Consta de doce unidades estructuradas en cuatro partes: página inicial para conocer los conocimientos previos y motivas al alumnado, los contenidos de cada tema relacionados con la adquisición de destrezas matemáticas básicas y referentes a la Biología, la Geología, la Física o la Química, las páginas de ampliación y las páginas de actividades para aplicar y consolidar lo aprendido.

O centro de pesquisas como agente de motivação realizadora no ensino tecnológico

Durante o longo período de experiências de magistério no ensino tecnológico de segundo e terceiro graus, o autor desta dissertação de mestrado vem aplicando uma metodologia que consiste em cativar os estudantes através de projetos inusitados, elaborados de conformidade com as habilitações específicas dos cursos, empregando-os como elemento motivador para realizar empreendimentos, paralelamente ao ensino curricular. Esse motivo, escolhido e planejado pedagogicamente, serve de estímulo para concentrar as atenções dos alunos na solução de problemas sócio-econômicos do país e da humanidade em geral, com o propósito de integrá-los no desenvolvimento científico e tecnológico, despertando o interesse pelo estudo e pela pesquisa, nas atividades dos projetos realizados por grupos de colegas de vocações afins. o projeto, caracterizado por um complexo cibernético ou biônico, tem a propriedade de efetivar a conjugação das diversas disciplinas, cujos conhecimentos são aplicados nessas oportunidades, ajudando os alunos a compreenderem melhor o sentido pragmático do conjunto curricular do seu curso. Atuando, de início, autodidatamente, mas orientado pelos princípios da Psicologia Educacional e mais tarde apoiado na Pedagogia de Dewey, o autor aprimorou sua metodologia nos trabalhos de Decroly, Kilpatrick, Skinner e Mc Clelland. A aplicação desse método de ensino suscitou a criaçao de um Centro de Pesquisas, integrado na organização escolar, através de uma de suas assessorias, sendo dirigido por um professor responsável e estruturado na forma de um setor onde se reunem as equipes de Planejamento Educacional e Pesquisa, Planejamento Técnico, Desenvolvimento de Atividades e Apoio, todas formadas por professores convidados, especialistas nos assuntos envolvidos pelos projetos. Este setor-ambiente, bem arquitetado,é instalado com recursos auxiliares didáticos e motivacionais, pequena biblioteca, museu, arquivo, uma pequena oficina de precisão, um laboratório para pesquisas tecnológicas e outro para tratamento fotográfico. Evidencia-se, assim, que o Centro de Pesquisas, como agente de motivação realizadora, atua na escola produzindo mudanças significativas no processo de ensino e consequentemente na formação dos alunos, pela sua metodologia e dinâmica das atividades a que estes se dedicam,manifestand sua capacidade de produzir, aplicando a criatividade aliada à sua aprendizagem, ao mesmo tempo valiosas para sua educação e para a sociedade. Fundamentado nos bons resultados obtidos com a aplicação dessa metodologia de ensino, o autor sugere a conveniência de serem implantados nas demais Escolas Técnicas e nos Centros Federais de Educação Tecnológica, centros ou núcleos de pesquisas semelhantes ao descrito nesta dissertação de mestrado.

Estudo exploratório das dificuldades do desenvolvimento de pesquisas científicas financiadas com recursos não reembolsáveis na modalidade convênio, com foco na FINEP

O Objetivo desta pesquisa é conhecer, a partir da percepção de pesquisadores e de analistas da Financiadora de Estudos e Projetos (Finep), os principais entraves que impactam o desenvolvimento de projetos de pesquisas científicas e tecnológicas financiados por recursos públicos não reembolsáveis no âmbito de convênios, com ênfase naqueles contratados junto a esta Financiadora. Este trabalho tem relevância a partir da constatação de que os recursos públicos para pesquisa e desenvolvimento vêm sofrendo redução de volume. O Fundo Nacional de Desenvolvimento Científico e Tecnológico (FNDCT), maior financiador público do país para Ciência, Tecnologia e Inovação, há alguns anos tem tido seu orçamento contingenciado e recentemente perdeu 40% do seu orçamento anual por conta da transferência de destinação dos recursos do Fundo Setorial de Petróleo e Gás Natural (CT-Petro). Neste contexto, a oferta de recursos públicos para pesquisas científicas e tecnológicas das universidades e outros centros de pesquisa ficou mais escassa. Esta circunstância exige que as instituições de pesquisa, por um lado elaborem projetos mais consistentes e bem estruturados, de forma a aumentar as chances de conquistar verbas junto às financiadoras públicas e, por outro lado, apliquem os recursos com eficiência para potencializar os resultados das pesquisas. A Finep, como secretaria executiva do FNDCT, tem papel destacado no apoio a projetos de pesquisa no país. Neste sentido, a proposição de um estudo para conhecer as dificuldades do desenvolvimento de pesquisas em projetos com a Finep assume destaque. A partir da discussão do tema, podem surgir novos caminhos e alternativas para melhoria da gestão dos projetos de pesquisa e com isso um melhor aproveitamento dos recursos em prol da Ciência.

O paradigma tecnológico e a revolução informacional: fundamentos da sociedade da informação

REGIS, Josiana Florencio Vieira; CAMPOS, Ana Celia Cavalcanti Fernandes. O paradigma tecnologico e a revoluçao informacional: fundamentos da sociedade da informaçao. In: CONGRESSO INTERNACIONAL EM SISTEMAS DE INFORMAÇAO E GESTAO DA TECNOLOGIA, 6., 2009. Sao Paulo. Anais eletronicos... Sao Paulo: FEA/USP, 2009. Trabalho oral.

Educação complementar e desenvolvimento humano: alcances e limites da estratégia socioeducativa do projeto OASIS de intervivência universitária

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Estudo e desenvolvimento de um capacitor eletrolítico de nióbio

It seeks to find an alternative to the current tantalum electrolytic capacitors in the market due to its high cost. Niobium is a potential substitute, since both belong to the same group of the periodic table and because of this have many similar physical and chemical properties. Niobium has several technologically important applications, and Brazil has the largest reserves, around 96%. There are including niobium in reserves of tantalite and columbite in Rio Grande do Norte. These electrolytic capacitors have high capacitance specifies, ie they can store high energy in small volumes compared to other types of capacitors. This is the main attraction of this type of capacitor because is growing demand in the production of capacitors with capacitance specifies increasingly high, this because of the miniaturization of various devices such as GPS devices, televisions, computers, phones and many others. The production route of the capacitor was made by powder metallurgy. The initial niobium powder supplied by EEL-USP was first characterized by XRD, SEM, XRF and laser particle size, to then be sieved into three particle size, 200, 400 e 635mesh. The powders were then compacted and sintered at 1350, 1450 and 1550°C using two sintering time 30 and 60min. Sintering is one of the most important parts of the process as it affects properties as porosity and surface cleaning of the samples, which greatly affected the quality of the capacitor. The sintered samples then underwent a process of anodic oxidation, which created a thin film of niobium pentóxido over the whole porous surface of the sample, this film is the dielectric capacitor. The oxidation process variables influence the performance of the film and therefore the capacitor. The samples were characterized by electrical measurements of capacitance, loss factor, ESR, relative density, porosity and surface area. After the characterizations was made an annealing in air ate 260ºC for 60min. After this treatment were made again the electrical measurements. The particle size of powders and sintering affected the porosity and in turn the specific area of the samples. The larger de area of the capacitor, greater is the capacitance. The powder showed the highest capacitance was with the smallest particle size. Higher temperatures and times of sintering caused samples with smaller surface area, but on the other hand the cleaning surface impurities was higher for this cases. So a balance must be made between the gain that is achieved with the cleaning of impurities and the loss with the decreased in specific area. The best results were obtained for the temperature of 1450ºC/60min. The influence of annealing on the loss factor and ESR did not follow a well-defined pattern, because their values increased in some cases and decreased in others. The most interesting results due to heat treatment were with respect to capacitance, which showed an increase for all samples after treatment

Desenvolvimento de bloco de vedação com barita na composição de partida para blindagem de radiação X

This work main objective is to study the use of bricks in barium X-rays rooms in order to contribute to the optimization of shielding rooms diagnosis. The work was based on experimental measurements of X-ray attenuation (40 to 150 kV), using ceramic seal bearing the incorporation of barium sulfat (BaSO4). Different formulations were studied in three different firing temperatures and evaluated for incorporation in the ceramic body. The composition of 20% of barite processed at a temperature of 950 ° C showed better physical and mechanical properties, is considered the most suitable for the purpose of this work. Were produced bricks sealing composition formulated based on that presented the best technological features. These blocks were tested physically as a building material and wall protective barrier. Properties such as visual, deviation from the square, face flatness, water absorption and compressive strength were evaluated for all the blocks produced. The behavior of this material as attenuator for X-rays was investigated by experimental results which take into account mortar manufacturers barium through the different strains and compared with the reference material (Pb). The simulation results indicated that the ceramic block barium shows excellent properties of attenuation equivalence lead taking into account the energy used in diagnostic X-ray

O efeito do tratamento da atapulgita no desenvolvimento de compósito com o polietileno reciclado

The study aimed at the treatment of attapulgite for the development and characterization of composite recycled low density polyethylene - PEBD_rec embedded with natural attapulgite - ATP_NAT, sifted - ATP_PN and attapulgite treated with sulfuric acid - ATP_TR in different compositions (1, 3 and 5%) and compared with the PEBD_rec. The atapulgitas, natural, screened and treated, were characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), particle size analysis, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and determining the area specific surface (BET). The composites were characterized by thermogravimetry (TG), differential scanning calorimetry (DSC), Xray diffraction (XRD), torque rheometry, scanning electron microscopy (SEM) and traction. The composite PEBD_rec / ATP (natural, sieved and treated) were produced by mixing in the molten state in a single screw extruder matrix wire with subsequent reprocessing matrix tape. It was found that the screening of attapulgite not reduce the quantity of quartz and the acid treatment completely extracted dolomite aggregate impurities of the channels attapulgite, and increase their surface area. The addition of attapulgite in PEBD_rec acts as a catalyst, reducing the thermal stability of the polymer. The increased concentration of attapulgite, increases resistance and reduces the elongation at break and modulus of elasticity of the composite PEBD_rec / attapulgite

Desenvolvimento e caracterização de filtros cerâmicos para aplicações a altas temperaturas

Ceramic filters are cellular structures that can be produced by various techniques, among which we highlight the replication method, or method of polymeric sponge. This method consists of impregnating polymeric foam with ceramic slurry, followed by heat treatment, where will occur decomposition of organic material and the sinter of the ceramic material, resulting in a ceramic whose structure is a replica of the impregnated sponge. Ceramic filters have specific properties that make this type of material very versatile, used in various technological applications such as filters for molten metals and burners, make these materials attractive candidates for high temperature applications. In this work we studied the systems Al2O3-LZSA ceramic filters processed in the laboratory, and commercial Al2O3-SiC ceramics filters, both obtained by the replica method, this work proposes the thermal and mechanical characterization. The sponge used in the processing of filters made in the laboratory was characterized by thermogravimetric analysis. The ceramic filters were characterized by compressive strength, flexural strength at high temperatures, thermal shock, permeability and physical characterization (density and porosity) and microstructural (MEV and X-rays). From the results obtained, the analysis was made of the mechanical behavior of these materials, comparing the model proposed by Gibson and Ashby model and modified the effective area and the tension adjusted, where the modified model adapted itself better to the experimental results, representing better the mechanical behavior of ceramic filters obtained by the replica method

Desenvolvimento e caracterização de um compósito matriz metálica (CMM): aço EUROFER97 reforçado com Carbeto de Tântalo - TaC

Steel is an alloy EUROFER promising for use in nuclear reactors, or in applications where the material is subjected to temperatures up to 550 ° C due to their lower creep resistance under. One way to increase this property, so that the steel work at higher temperatures it is necessary to prevent sliding of its grain boundaries. Factors that influence this slip contours are the morphology of the grains, the angle and speed of the grain boundaries. This speed can be decreased in the presence of a dispersed phase in the material, provided it is fine and homogeneously distributed. In this context, this paper presents the development of a new material metal matrix composite (MMC) which has as starting materials as stainless steel EUROFER 97, and two different kinds of tantalum carbide - TaC, one with average crystallite sizes 13.78 nm synthesized in UFRN and another with 40.66 nm supplied by Aldrich. In order to improve the mechanical properties of metal matrix was added by powder metallurgy, nano-sized particles of the two types of TaC. This paper discusses the effect of dispersion of carbides in the microstructure of sintered parts. Pure steel powders with the addition of 3% TaC UFRN and 3% TaC commercial respectively, were ground in grinding times following: a) 5 hours in the planetary mill for all post b) 8 hours of grinding in the mill Planetary only for steel TaC powders of commercial and c) 24 hours in the conventional ball mill mixing the pure steel milled for 5 hours in the planetary mill with 3% TaC commercial. Each of the resulting particulate samples were cold compacted under a uniaxial pressure of 600MPa, on a cylindrical matrix of 5 mm diameter. Subsequently, the compressed were sintered in a vacuum furnace at temperatures of 1150 to 1250 ° C with an increment of 20 ° C and 10 ° C per minute and maintained at these isotherms for 30, 60 and 120 minutes and cooled to room temperature. The distribution, size and dispersion of steel and composite particles were determined by x-ray diffraction, scanning electron microscopy followed by chemical analysis (EDS). The structures of the sintered bodies were observed by optical microscopy and scanning electron accompanied by EDS beyond the x-ray diffraction. Initial studies sintering the obtained steel EUROFER 97 a positive reply in relation to improvement of the mechanical properties independent of the processing, because it is obtained with sintered microhardness values close to and even greater than 100% of the value obtained for the HV 333.2 pure steel as received in the form of a bar